Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Dorchester Homeowners
If your fireplace has gone a season or two without a cleaning, the creosote coating the inside of the flue is the thing to deal with before you burn again. A professional chimney sweep in Dorchester removes that buildup, checks the flue and firebox for cracks or blockages, and gives you a straight answer about what’s safe to use. We work exclusively on chimneys, so your sweep covers the whole system, not just the visible firebox. Our technicians have up to 10 years of experience, and they arrive with drop cloths, a HEPA vacuum, and the rotary brushes and rods a proper cleaning needs. Same-day service is often possible when you call early. Reach us at (844) 443-4495.
What Our Chimney Sweep Service Includes
Every visit starts with a look at your whole system, not just the firebox. Depending on what we find, your appointment may include one or several of the following.
Level 1 Inspection
A Level 1 inspection is the standard visual check that comes with a routine sweep. It covers the accessible portions of the firebox, damper, smoke chamber, and flue, plus the exterior of the chimney where it’s visible from the ground or roof. You need it every time the chimney is cleaned, and it’s the fastest way to catch small issues like a cracked damper or a loose cap before they grow.

Level 2 Inspection
A Level 2 inspection goes further, using a camera to look at the interior of the flue from top to bottom. It’s the right call after a chimney fire, when you’ve changed fuels or appliances, or when you’re buying or selling a home. We provide the video and a written report so you can see what we see, which matters when a real-estate transaction is on the line.

Creosote Removal
Creosote is the tar-like residue left behind by wood smoke, and it builds up in layers that range from soft soot to a hard, glazed coating that’s difficult to remove. We use rotary brushes sized to your flue to break it loose, then vacuum the debris so nothing ends up on your floor. If the glaze is thick enough that brushing won’t clear it, we’ll tell you honestly and explain your options.

Soot Removal
Soot is the powdery, fine-particle layer that settles on the walls of the flue and smoke chamber. It’s less dangerous than creosote on its own, but it clogs the flue over time and reduces draft. We remove soot with soft brushes and a HEPA vacuum so it doesn’t drift into the room.
Annual Sweep
An annual sweep keeps your chimney in working order and gives you a record of its condition from year to year. It’s also what most insurance policies and home inspectors expect to see when they ask about maintenance. We recommend booking before the heating season, so the first cold night doesn’t catch you with a blocked flue.
Fireplace Cleaning
Beyond the flue, we clean the firebox itself, the grate, the hearth, and the glass doors on gas or wood-burning inserts. Ash and debris left in the firebox hold moisture and can corrode the metal liner or brick over time. A clean firebox draws better and looks better, and it’s part of every sweep we do.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Sweep
We work with professional-trade products from DuraFlex and HeatShield, both of which appear in the liner systems we see most often in older Dorchester homes. DuraFlex flexible liners are common in retrofits where a straight stainless pipe won’t fit the flue; when one is damaged, we can inspect it with a camera and recommend repair or replacement based on what the video shows. HeatShield resurfacing is a restoration option that can rehabilitate a deteriorating flue without tearing the whole chimney apart. We also work with Gelco and Copperfield components when a sweep turns up problems with dampers, caps, or venting accessories.
We don’t claim to stock OEM parts or act as a dealer for any of these makers. What we do is know where their products wear out, how they fail in a New England climate, and what the right fix looks like. Whether you have Copperfield, Gelco, Olympia Chimney, Famco, or any other make, we can help.
Signs You Need Chimney Sweep Right Now
- Creosote buildup you can see. If you can shine a light up the flue and see a thick, flaky or shiny layer on the walls, it’s past time for a sweep. Creosote in that condition is the fuel a chimney fire needs.
- Smoke rolling back into the room. A fireplace that used to draw well but now puffs smoke is telling you the flue is partly blocked. A soot or creosote clog, a bird nest, or a damaged damper can all cause it.
- A strong, sour smell from the fireplace. That odor is often creosote and moisture reacting together. It gets worse in humid weather and can mean the flue needs cleaning and the cap needs attention.
- It’s been more than a year since the last sweep. If you can’t remember the last cleaning, that’s your answer. Annual service is the standard for a reason, and a sweep is the cheapest way to avoid a much bigger repair.
- You just bought the house. A Level 2 inspection before or right after closing tells you what you’re working with. It’s the one report a buyer, seller, or agent can rely on without a repair pitch attached.
Our Chimney Sweep Process – Step by Step
- 1
We protect the room first. Drop cloths go down around the hearth, and a HEPA vacuum runs throughout the job so fine ash doesn’t end up on your furniture. This is standard for every sweep, not an upgrade.
- 2
We inspect before we clean. A visual check of the firebox, damper, smoke chamber, and flue tells us what we’re dealing with. If anything looks off, we’ll explain it before we start brushing.
- 3
We sweep the flue. Rotary brushes sized to your flue break up creosote and soot from the bottom or the top, depending on the setup. We use rods and a camera where the flue has offsets or the liner is questionable.
- 4
We vacuum and clean the firebox. Once the flue is clear, we clean the firebox, grate, and hearth, then run the vacuum again to catch anything that settled. You shouldn’t have to clean up after us.
- 5
We give you a report and a photo record. You get a plain-language summary of what we found, with photos where they help. If something needs repair, we tell you, and we tell you plainly when it can safely wait.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Sweep Cost in Dorchester?
A routine chimney sweep in Dorchester typically runs $180 to $320 depending on the flue setup and how much buildup is there. A Level 2 inspection with a camera usually runs $250 to $450, and if you combine a sweep with the inspection, the total is usually less than booking them separately. Creosote removal is included in a standard sweep; heavy glazed creosote that needs extra work can push the job toward the top of the range. Fireplace cleaning is part of the sweep, not an add-on. Liner repair or resurfacing with HeatShield runs more, typically $1,500 to $3,500 depending on length and condition, and we don’t recommend that without camera footage you can see for yourself.
What affects the price: the number of flues, the height and pitch of the roof, the condition of the liner, and whether the chimney has ever been relined. How to avoid overpaying: get a written estimate before any work starts, ask what’s included, and don’t agree to liner or masonry work based on a verbal description alone. Our estimates are free, and the written estimate sets the final price. If the job turns out smaller than expected, we say so.
Chimney Sweep Near Dorchester – Our Service Area
We connect homeowners across Dorchester and the surrounding neighborhoods with local chimney professionals, including Mattapan, Roxbury, Mission Hill, the South End, Back Bay, Fenway, Beacon Hill, the North End, Allston, Jamaica Plain, and Roslindale. Dispatch runs Sunday through Friday, 7am to 7pm, so most calls get a technician out the same day when you book early. If you’re outside Dorchester, a local chimney sweep covers Roxbury and a chimney sweep covers Mattapan, both with the same process and standards.
Serving Dorchester, MA – Our Local Coverage Area
We serve Dorchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Sweep in Dorchester
A chimney sweep removes creosote, soot, and debris from your flue and firebox, then inspects the accessible parts of the system for damage or blockage. That includes the damper, smoke chamber, and cap, plus a look at the exterior where it’s visible. It’s a cleaning and a check-up together, and it’s how you find out whether your chimney is safe to burn in. Call (844) 443-4495 for an exact quote – estimates are free.
A routine sweep usually takes 45 minutes to an hour and a half, depending on the flue setup and how much buildup there is. A Level 2 inspection with a camera adds another 30 to 60 minutes. Multiple flues or heavy glazed creosote can stretch the visit longer, and we’ll tell you up front how long we expect it to take.
A typical chimney sweep in Dorchester runs $180 to $320, and a Level 2 inspection with a camera runs $250 to $450. Combining them usually costs less than booking each separately. The written estimate sets the final price, and our estimates are free. Call (844) 443-4495 for an exact quote – estimates are free.
Yes. We work with DuraFlex flexible liners and HeatShield resurfacing products as part of our inspection and repair work. If your sweep turns up a problem with either, we’ll show you the camera footage and explain whether resurfacing or a liner replacement makes more sense. We don’t claim to be a dealer for either brand; we know how they’re installed and where they fail.
Same-day service is often possible when you call early, and our dispatch runs Sunday through Friday, 7am to 7pm. We’re closed Saturday. We answer 24/7, so call whenever it’s convenient and we’ll book you into the next opening. Call (844) 443-4495 for an exact quote – estimates are free.
Every sweep comes with a satisfaction guarantee: if something isn’t right, we come back and make it right. Repair work carries the manufacturer warranty on the parts we install, and we’ll spell out the terms in writing before you agree to anything. Nothing is recommended without evidence you can see, and we say plainly when work can safely wait.
Clear about three feet around the fireplace, move any fragile items off the hearth, and make sure we can get to the roof or the cleanout if your setup has one. Keep pets and kids out of the room while we’re working, and remove ashes only after we confirm the firebox is cold. That’s it. If you have a gas fireplace, let us know when you book so we bring the right tools.
If you’re dealing with an aging flue, restoring it can sometimes save you from a full liner replacement. HeatShield resurfacing is one option we check before recommending replacement, and DuraFlex liners are the other. We work with Gelco and Copperfield components as well, so one call can cover the sweep, the inspection, and any cap or crown work that needs doing. For a fuller overview of everything we handle, start with Chimney Sweep Dorchester.
Schedule Your Chimney Sweep Service in Dorchester Today
Book a chimney sweep before the heating season starts, and you’ll know your fireplace is safe to use when the first cold night hits. Call (844) 443-4495 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Our estimates are free and there’s no obligation – we’ll show you what we find and tell you honestly what can wait. Whether you need a routine chimney sweep or a Level 2 inspection, one call covers it.
Written by the team at Chimney Sweep Dorchester.