Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Mattapan
If your Mattapan chimney is topping out with a crumbled mortar crown or a cap that’s been sitting loose for years, we handle the whole job: inspection, crown repair or coating, flashing, and a properly sized cap. We’re a chimney-only specialist, so this isn’t a side job for us. Mattapan’s older brick stacks need someone who knows what’s underneath before anything goes on top. Our technicians have up to 10 years of experience, and the local pros we connect you with are licensed and insured as their state requires. Call (844) 443-4495 for a free estimate.
Why Mattapan Homeowners Call Chimney Sweep Dorchester for Chimney Cap & Crown
We work in Mattapan often enough to know the housing stock by sight. The Blue Hill Avenue corridor and the side streets off it are lined with 1900 – 1930s wood-frame Colonials, bungalows, and triple-deckers, and their brick chimneys share a family resemblance: original crowns that have cracked and pulled away, clay-tile flues that took decades of coal-to-oil-to-gas heat, and caps that were either never installed or set by someone in a hurry.
We also know the reputation this market has. Cap and crown work is where the worst upselling in this trade happens, and Mattapan homeowners have good reason to be skeptical of a truck pulling up and declaring thousands of dollars of masonry necessary. Our answer is simple: nothing gets recommended without camera evidence you can look at yourself. The inspection stands on its own as an honest condition report, separate from any repair. If your crown can wait a season, we’ll say so.
We connect you with local professionals who cover Mattapan and the surrounding neighborhoods, and we answer the phone 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Mattapan
Cap and crown work on an older Mattapan stack rarely stays a one-part job. The top of the chimney and the flue beneath it are tied together, so we look at both before quoting anything. Here’s what our Chimney Cap & Crown team handles.
Cap Installation in Mattapan
A correctly sized cap is the cheapest protection a Mattapan chimney can get. It keeps nor’easter rain out of the flue and stops birds, squirrels, and raccoons from setting up inside a stack that’s open to the sky. On a lot of these homes the flue has run uncapped since the house was built, so installation usually starts with confirming the flue dimensions rather than guessing at them.

Cap Replacement in Mattapan
Plenty of Mattapan caps were set decades ago and have rusted through, blown loose, or been sized for a flue they don’t actually fit. A loose cap is worse than no cap in one way: it rattles, shifts, and lets water run down the side of the stack instead of shedding off the top. We pull the old one, check the flue tile for cracking while it’s off, and set a replacement that actually fits.

Crown Repair in Mattapan
The crown is the mortar or concrete slab on top of the chimney, and it’s supposed to overhang the brick with a drip edge so water runs off instead of soaking in. On Mattapan’s older chimneys it’s often spalled, cracked, and separated from the flue tile entirely. We rebuild or repair the crown so the overhang and drip edge are back where they should be, which is what actually stops the freeze-thaw damage eating your exterior brick.

Crown Coating in Mattapan
When the crown is cracked but still structurally sound, a proper coating can seal it and buy years before a rebuild is needed. We use restoration-grade materials for this rather than consumer-shelf sealants. If the crown is too far gone for coating to hold, we’ll tell you plainly and show you why.
Trusted Brands We Service in Mattapan
We work with a curated set of professional-trade brands: Copperfield, DuraFlex, HeatShield, and Gelco, among others. These are the products chimney contractors specify, not the consumer-grade items on a hardware store shelf. If your existing cap or crown components came from one of them, we know what we’re looking at and how to work with it. Brands matter less than correct sizing and installation, and we don’t keep parts sitting around waiting for a job; we source what the chimney actually needs and move on it quickly.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Mattapan Homes
- Crown mortar cracking and separating from the flue tile. This is the most common thing we find on Mattapan stacks, and it’s the entry point for water that spalls exterior brick one course at a time. Once the gap opens, freeze-thaw cycles widen it every winter.
- Original flues capped over without inspection. These chimneys were built for coal, later ran oil, and now serve gas or wood. Capping a stack whose clay tiles are already cracked traps moisture and hides a liner problem behind a nice new lid.
- Multi-flue stacks with a single cap. In the Blue Hill Avenue corridor, basements converted to apartments and added wood stoves created multiple flue connections in one stack. A single-flue cap leaves the second flue open to rain and animals.
- Mislabeled dampers. The second flue is often hiding behind a shared brick pier and mislabeled at the damper, so which appliance vents where has to be confirmed before any cap goes on.
Pricing for Chimney Cap & Crown in Mattapan, MA
Here’s what this work typically runs in the Mattapan market. A standard single-flue cap installation usually lands around $250 to $550 depending on flue size and cap style. A custom cap fabricated for an odd-sized or older stack runs roughly $450 to $900. Crown repair, where mortar is rebuilt with a proper overhang and drip edge, generally falls between $400 and $1,100. Crown coating on a sound but cracked crown typically runs $350 to $700. Multi-flue caps for a two-flue stack usually come in between $500 and $1,000.
Those ranges are estimates. The written estimate sets the final price, and we don’t recommend a thing you haven’t seen evidence for on camera first. If the flue itself needs liner work, that’s a separate conversation you can have with the report in hand. Estimates are free.
We Also Serve Cities Near Mattapan
We cover Mattapan and the towns around it: Milton, Dorchester, Roslindale, and Hyde Park. If you’re in one of those and your cap or crown needs attention, we can help with that too. For Mattapan itself, start with our Mattapan page.
Serving Mattapan, MA – Our Local Coverage Area
We serve Mattapan and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Mattapan
Not without looking first. Capping an unlined or cracked clay-tile flue without inspection can trap moisture and mask a liner problem that needs addressing anyway. We camera-inspect the flue and smoke chamber, show you the footage, and then tell you whether capping alone is safe or the liner needs work. Call (844) 443-4495 for a free estimate.
Because water is getting in through a failed crown and freezing inside the brick. The original crown on these homes has often pulled away from the flue tile, so nor’easter rain runs straight into the stack and freeze-thaw cycles pop the exterior face off course by course. Repairing the crown with a proper overhang and drip edge stops the cycle at the source. Call (844) 443-4495 and we’ll show you exactly where it’s getting in.
You don’t, until someone traces it, and that’s the honest answer. In Mattapan’s multi-flue stacks the connections are often mislabeled at the damper, and a second flue can hide behind a shared brick pier. We confirm which flue serves which appliance with a camera before capping anything. Call (844) 443-4495 to book it.
Yes, and gas or oil venting is exactly why. A flue that carries combustion gases still needs a clear path and an intact liner, and a failed crown or missing cap lets water damage the flue whether or not you ever light a fire. Our inspection stands on its own as a condition report, not a setup for a sale. Call (844) 443-4495 – estimates are free.
A stock cap fits standard flue sizes; a custom cap is built to the actual dimensions of your stack. On 1900 – 1930s Mattapan chimneys, flue sizes and crown shapes are often irregular, so a stock cap may sit loose or not cover the flue properly. We measure first and tell you which one your chimney actually needs. Call (844) 443-4495 to get an exact quote.
If your Mattapan chimney needs a cap, a crown repair, or just an honest look at what’s going on up there, call (844) 443-4495 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Dorchester.