Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Dorchester Homeowners
Most chimney problems in Dorchester stay invisible until the first cold snap, when a fire is lit and a draft that worked last year won’t pull. By then you’re dealing with a cracked flue tile, a failed crown, or glaze the fire never fully burned off. An inspection catches those things while the season is still far enough away to plan for them. Our technicians have up to 10 years of experience and work on chimneys only, so the walk-through is the whole job, not a warm-up to a sales call. A written report with camera photos goes to you either way. Same-day visits are often possible, and the estimate is free. Call (844) 443-4495.
What Our Chimney Inspection Service Includes
Six inspection types. Each answers a different question, and we’ll tell you which one you actually need before anyone climbs anything. All prices are estimates set by a written quote before booking.
Level 1 Inspection
A Level 1 inspection is the visual check you want every year: accessible flue surfaces, the firebox, the damper, the cap, and the visible parts of the exterior, checked from inside and, where reachable, from the roof. You need it when nothing has changed in the setup and you’re keeping the fire burning as usual, or when you’ve just had a sweep. We give you a plain written summary: what’s fine, what’s wearing, and what can wait until spring.
Level 2 Inspection
A Level 2 inspection is the same check plus the parts hidden behind walls: flue lining, joints, and the attic and crawlspace runs, using a video camera pushed up the flue. You need it after a chimney fire, after any change to the appliance or fuel type, and on a house you just bought. We include the camera footage and stills with the report, so you can see the same crack we did.
Level 3 Inspection
A Level 3 inspection is the one where we go into the structure, opening a section of wall or the crown where the flue is damaged or the lining is resting on something failing. It’s needed when a Level 2 finds a problem that can’t be diagnosed from inside the flue, not on a hunch. We only recommend it after a Level 2 result justifies it, and we explain what’s being opened and how it gets closed.
Camera Inspection
Camera inspection is how a flue is really read: a video probe covers the full length of the flue, including the bends and the top section that a flashlight can’t see. The footage catches broken tile, gaps at offset joints, and creosote buildup in the wrong place. We attach the stills to your report so a second reading is possible without calling us back out.
Flue Inspection
A flue inspection focuses on the flue alone: its size, its condition, its draft, and whether the appliance is vented to the right flue. A wood stove or a gas appliance often fails its draft for reasons that show up here. We check cross-section, the top termination, and the connection at the appliance, then tell you whether the existing flue can stay.
Real Estate Inspection
A real estate inspection is the same Level 2 work, done on a calendar the transaction respects: a seller who needs a report before listing, a buyer who needs to know before closing, or an agent who needs a straight answer for both sides. It’s a standalone service, ordered and paid for on its own, so there is no incentive to find work. You get the report, the photos, and a written list of what’s urgent and what isn’t.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
We work with professional-trade brands because that’s what’s actually installed in the region’s chimneys. DuraFlex liners are what we look at first when a flexible reline has been fitted: the top clamp, the connection at the insert, and the wear points at every joint. HeatShield tells us a chimney has been resurfaced rather than relined, which changes what a Level 2 report should say. Gelco and Copperfield are the names we see in older venting and cap work, and knowing how those assemblies fit is what lets us read a flue instead of guessing.
Inspecting a brand is different from installing one. We read the equipment you have, tell you where it wears, and flag what needs attention without assuming the answer is a whole new system. Whether your chimney has DuraFlex, HeatShield, Gelco or Copperfield components, or any other make, we can help.
Signs You Need Chimney Inspection Right Now
- A strong smoky smell that won’t clear. That’s creosote in the flue that hasn’t fully combusted, and it’s exactly the stage the appliance is most likely to ignite it. The inspection tells you how much is there and where.
- Water stains on the ceiling or the chimney breast. Water is coming in from the crown or a failing flashing, and the wood behind the wall may already be soaked. That’s a structural problem, not a cosmetic one.
- Flue tiles or chunks of mortar in the firebox. Loose pieces mean the liner is breaking up, and a hot fire can pull a shard into the path of the smoke. Stop using the fireplace until it’s checked.
- A fire that smokes or smells even when it’s burning well. Draft trouble is usually a flue issue: wrong size, an obstruction, or an offset that has cracked. A camera run tells you which.
- A new home, or a house that sat empty. A short inspection is what a purchase or a long vacancy calls for, before the first fire puts a crack in the flue. The report also tells you what the previous owner left behind.
Our Chimney Inspection Process – Step by Step
- 1
Walk-through and an honest question. We start inside with you, look at the appliance, the firebox and what you’ve been burning, and find out if anything has changed since the last inspection. That tells us which level of inspection answers your question.
- 2
Exterior and roof check. From the roof we look at the crown, the cap, the flashing and the top of the flue. This is where the water comes in and where a crack shows up first.
- 3
The camera run. We put a video probe up the flue and work the full length, watching for cracked tiles, open joints and creosote in the wrong place. The footage is recorded, not just watched.
- 4
The report. You get the findings in plain language, with the photos attached: what’s safe to use now, what’s wearing, and what needs attention before the next fire. We don’t hand you a stack of work because we found something.
- 5
A written estimate for anything that needs doing. Every price is set by that estimate. If you’re only after the report, you keep the report, and that’s the end of it.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in Dorchester?
Chimney inspection in Dorchester typically runs $75-$125 for a Level 1 visual check, $150-$350 for a Level 2 with camera, and $400-$700 or more for a Level 3 where the structure has to be opened. Those are estimates for common cases. A real estate inspection sits in the Level 2 range unless the property needs more. The final price is set by the written estimate before we start work.
| Inspection Type | Typical Estimate | What Drives the Price |
|---|---|---|
| Level 1 | $75-$125 | Number of appliances, easy roof access |
| Level 2 | $150-$350 | Flue length, attic and crawlspace access, number of flues |
| Level 3 | $400-$700+ | Wall or crown opening, repair after diagnosis |
| Flue inspection | $125-$250 | Footage length, appliance connection, termination |
| Real estate inspection | $150-$350 | Transaction timing, property size, report format |
What moves the price: the number of flues, how easy the roof is to reach, and whether the report has to be turned around for a closing. You avoid overpaying by asking which inspection level you actually need before you book. A Level 1 for a yearly check is correct; a Level 2 for a recent purchase is correct. Everything we include (the camera footage, the photos, the written findings) is part of the free estimate, so there’s nothing added at the end. Call (844) 443-4495.
Chimney Inspection Near Dorchester – Our Service Area
We cover Dorchester and the neighborhoods around it, including Mattapan, Roxbury, Mission Hill, the South End, Back Bay, the Fenway, Beacon Hill, the North End, Allston, Jamaica Plain and Roslindale. The closer to Dorchester you are, the quicker we can get there, and we’ll give you a straight arrival window when you book. If you’re in Mattapan or Roxbury and need the check before a closing, our chimney inspection page covers that work directly.
Serving Dorchester, MA – Our Local Coverage Area
We serve Dorchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Dorchester
A chimney inspection is a documented assessment of the whole venting system: the flue, the firebox, the cap and crown, the flashing and the connections, not just a look up the chimney. It ends with a written report and photos so you know what’s sound and what needs watching. It’s different from a sweep, which removes creosote; the inspection tells you whether sweeping, repair or nothing at all is the right next step. We offer it as a standalone service so the answer isn’t tied to a repair sale. Call (844) 443-4495.
A Level 1 inspection usually takes about 45 minutes, and a Level 2 with the camera takes roughly an hour to 90 minutes. Timing depends on how many appliances share the flue and how easy the roof and attic are to reach. We’ll tell you when you book so you can plan the day, and a real estate inspection is scheduled to fit a closing deadline.
Most inspections in Dorchester fall between $75 and $350 depending on the level, and Level 3 work that opens the structure starts around $400. The written estimate sets the exact price, and it’s free. We tell you what level you need before we drive out. Call (844) 443-4495.
Yes. Those are the brands we see most often in the region’s chimneys, and we read DuraFlex liners and HeatShield resurfacing as part of a standard Level 2. If your chimney was relined or restored at some point, the inspection tells you how that work is holding up. Whether your equipment is DuraFlex or another make, we can help.
Same-day inspections are often possible if you call early, and we’ll tell you the soonest opening when you do. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Yes. The report is yours, photos and camera stills included, and it stands on its own if you need it for a transaction, an insurer or a second opinion. We don’t tie the report to a repair order; if you take it elsewhere, that’s fine. The report describes condition and what’s urgent. Call (844) 443-4495 if you want us to walk you through it.
Clear the area in front of the fireplace, and avoid lighting a fire for at least a day before so the flue is cool and the camera sees it clean. Make sure we can reach the attic and any crawlspace, and leave the flue damper accessible. If you know the age of the appliance or recent work, tell us, because that shapes what we check.
Schedule Your Chimney Inspection Service in Dorchester Today
Before the season starts, get the chimney looked at properly: a written report, camera footage, and a straight answer about whether anything needs doing now or can wait. The estimate is free, and the inspection is a standalone service, not a repair sale. Call (844) 443-4495. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our chimney sweep service and our chimney inspection work across the neighborhood both start with the same honest check.
Written by the team at Chimney Sweep Dorchester.