Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Roxbury
If your Roxbury chimney is missing a cap or the crown is crumbling, rain and animals have an open door into the flue – and in this neighborhood, that flue may be venting more than one household’s heat. We’re a chimney-only specialist working throughout Roxbury, from the triple-deckers off Blue Hill Avenue to the brick rowhouses along Warren Street. Our technicians have up to 10 years of experience, and we know how these older stacks are put together. Call (844) 443-4495. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Roxbury Homeowners Call Chimney Sweep Dorchester for Chimney Cap & Crown
Roxbury’s housing stock makes cap and crown work a different job than it is in a suburb of detached homes. Dense rows of 1880 – 1920 wood-frame triple-deckers and brick rowhouses share walls, share rooflines, and often share a single masonry chimney. When the original chimney was built, it vented coal; many have since been relined for oil or gas and now serve as the only vent for a furnace or water heater. A cap that’s missing, undersized or unsealed isn’t a cosmetic problem here. It’s how water gets into a shared stack and how one blocked flue can backdraft into more than one apartment.
That’s the kind of thing we check on every Roxbury visit. We’re straight with homeowners about what we find: nothing gets recommended without camera evidence you can look at yourself, and we’ll tell you plainly when a repair can safely wait. We work with professional-trade brands – Olympia Chimney, Famco, Copperfield – which means the caps and venting components we specify are the same ones industry pros use, not hardware-store substitutes. Send us a photo or book a visit and we’ll give you a written estimate before any work starts. The local pro is licensed and insured as their state requires.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Roxbury
Our Chimney Cap & Crown team handles the full range of cap and crown work on Roxbury’s older chimneys. Here’s what each piece involves.
Cap Installation in Roxbury
A proper cap does three jobs at once: it keeps rain out of the flue, keeps birds and squirrels from nesting in the stack, and gives the chimney a spark arrestor. On a Roxbury triple-decker, cap installation has to account for how the flue is actually being used. We measure the flue opening, match the cap to it, and set it so it’s sealed and level – not just dropped on and hoped for. The right fit matters more than the brand stamped on the lid.

Cap Replacement in Roxbury
Old caps rust, bend, or get knocked loose. Some were installed with too little clearance and trap moisture against the flue. When we replace a cap in Roxbury, we check the flue tile beneath it for cracking and confirm the new cap’s height and screening suit the appliance venting below. If the flue shows damage, we’ll show you the camera footage before recommending anything further.

Crown Repair in Roxbury
The crown is the sloped concrete or mortar top that sheds water away from the chimney. Cold, wet New England winters with repeated freeze-thaw cycles break crowns down fast on Roxbury’s exposed brick chimneys – hairline cracks widen, water gets in, and the damage runs down into the mortar joints and dampers. We repair cracked and spalled crowns and rebuild the slope so water runs off the way it’s supposed to.

Crown Coating in Roxbury
When a crown is intact but starting to show surface wear, a flexible coating can extend its life and seal the small cracks before they become structural. It’s the less invasive option, and on the right crown it’s a sensible one. We’ll tell you when coating is enough and when a crown has gone too far for it to help.
Multi-Flue Cap and Custom Cap Work
This is where Roxbury gets specific. Many chimneys here carry more than one flue – one for a furnace, one for a water heater, sometimes another for a fireplace. A single-flue cap won’t do. A multi-flue cap has to cover the whole stack while keeping each flue’s exhaust separate, so one appliance’s gases don’t drift into another’s flue. We also build custom caps when a standard size doesn’t fit an older Roxbury stack with unusual dimensions. Proper sealing at the base and flashing around the cap matter as much as the lid itself.
Trusted Brands We Service in Roxbury
We work with a focused set of professional-trade brands, and that shows in the caps and components we specify for Roxbury homes. Olympia Chimney and Copperfield cover venting components and caps built to hold up in a New England winter. Famco supplies accessories that fit the older, non-standard stacks common on Blue Hill Avenue and Dudley Street rowhouses. DuraFlex and HeatShield come into play when a cap or crown issue turns out to sit on top of a liner problem – HeatShield resurfacing can often restore an aging flue instead of tearing it out. We don’t claim to stock parts on a truck or keep a warehouse; what we bring is familiarity with how these brands’ products perform in this climate, and a fast path to the right component for your chimney.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Roxbury Homes
The failures here tend to repeat, because the housing repeats. Here’s what comes up most on Roxbury cap and crown calls:
- Missing or damaged caps on shared flues. A cap that’s gone or bent open lets nor’easter rain straight into the stack, and on a shared chimney that spalling and blockage reaches every unit venting into it, not just the top floor.
- Cracked crowns from freeze-thaw cycles. Water gets into a hairline crown crack, freezes, widens it, and the cycle repeats all winter. Left alone, that water reaches the damper and the mortar joints below.
- Improperly sized or unsealed caps on multi-flue chimneys. On a rowhouse with several flues, a loose or oversized cap lets exhaust from one appliance cross into a neighboring flue – a real safety issue, not a drafty-room annoyance.
- Repurposed coal chimneys with spalling brick. Many of these stacks were built for coal and relined for gas or oil. Years of sulfur-rich flue gases leave the brick spalling, and a failing cap or crown speeds the decline.
Pricing for Chimney Cap & Crown in Roxbury, MA
Pricing on cap and crown work runs by the job, and the written estimate is what sets the final number. Here are typical ranges for Roxbury’s market so you know roughly what to expect before we arrive:
| Service | Typical Roxbury Cost |
|---|---|
| Cap installation (single-flue, standard) | $180 – $350 |
| Cap replacement (removing old cap, re-seating) | $200 – $400 |
| Multi-flue cap (triple-decker or rowhouse stack) | $350 – $700 |
| Custom cap (non-standard dimensions) | $450 – $900 |
| Crown repair (cracked or spalled) | $300 – $650 |
| Crown coating | $200 – $450 |
What moves the number: the number of flues on the stack, roof height and access on a tight Roxbury street, the condition of the flue tile under an old cap, and whether crown repair turns up liner damage underneath. Roof access in dense triple-decker rows can take extra setup, and we factor that into the estimate rather than surprising you later. Estimates are free.
We Also Serve Cities Near Roxbury
The same cap and crown work we do in Roxbury reaches the surrounding neighborhoods too. We cover Mission Hill, Jamaica Plain, the South End, and Fenway, all of which share the same triple-decker and rowhouse housing stock and the same shared-flue concerns. If you’re just over the line from Roxbury, the answer is usually yes – call and we’ll confirm.
Serving Roxbury, MA – Our Local Coverage Area
We serve Roxbury and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Roxbury
A properly fitted multi-flue cap keeps each flue’s exhaust separated and blocks the wind and rain that push gases back down the stack. In a shared triple-decker chimney, a single blockage or a cap that doesn’t seal each flue individually can let one appliance’s carbon monoxide backdraft into several apartments at once – which makes flue separation and a correctly sized multi-flue cap a life-safety check, not a cosmetic one. We inspect the whole stack and show you what we find on camera. Call (844) 443-4495 for an exact quote – estimates are free.
A multi-flue cap sized to the whole stack, with each flue covered and separated and the base properly sealed and flashed, is the right fit for most Roxbury rowhouses. Single-flue caps leave the other flues exposed and can allow cross-contamination between appliances venting into the same chimney. We measure the actual flue openings and match the cap to them rather than guessing. Call (844) 443-4495 for an exact quote – estimates are free.
Check the crown every year and expect repair or coating every several years in this climate. Roxbury’s cold, wet winters and repeated freeze-thaw cycles crack mortar crowns faster than a milder climate would, and each winter widens an unrepaired crack. A coating can buy time on a sound crown; a cracked or spalled crown needs repair before water reaches the damper. We’ll tell you which one you’re looking at. Call (844) 443-4495 for an exact quote – estimates are free.
Yes – a sealed cap is one of the most direct ways to slow spalling, because most of the water that drives it comes in through an open or damaged flue top. Nor’easters drive rain straight down an uncapped flue, and on Roxbury’s older brick chimneys that moisture works into the masonry and rusts dampers. A correctly fitted cap sheds that water away from the stack. It won’t reverse spalling that’s already there, but it stops the feed. Call (844) 443-4495 for an exact quote – estimates are free.
A Level 2 inspection covers the full chimney system with camera examination of the flue interior, plus the cap, crown, flashing, and accessible exterior, giving you a condition report independent of any repair sale. For a Roxbury triple-decker or rowhouse, it’s the right level when a shared stack or a change of appliance is involved, because it lets us see whether flues are separated and venting correctly. The report is honest and standalone – we don’t turn it into a mandatory repair sell. Call (844) 443-4495 for an exact quote – estimates are free.
If your Roxbury chimney needs a cap, a crown repair, or a straight answer about what’s happening up on the roof, call us. We keep it chimney-only, so the person who looks at your cap knows the whole system under it. Call (844) 443-4495 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Dorchester.